Region 2 Committee Meeting 2022

Virtual: https://events.vtools.ieee.org/m/321969

This meeting is for Region 2 Volunteers (Section Chairs or designees and appointed and elected R2 Committee). The meeting shall include volunteer training, section updates and committee member reports. IMPORTANT NOTE: IEEE at all levels continues to monitor the ongoing pandemic and its evolutions. At this time statistical indicators all lean towards March being relatively safe for the vaccinated. Region 2 will require social distancing during our meetings, observing both local ordinance and best practices for the protection of all. Consistent with this, we require that ALL attendees be fully vaccinated and able to show proof of same if requested. If the intended Section delegate or other attendee is not vaccinated, please select an alternate who is, and have them attend. There will be no exceptions. In addition, we are limiting attendance to Region 2 committee and one officer per section (Section Chair or their designee). Agenda: TBD Virtual: https://events.vtools.ieee.org/m/321969

MOVE Virtual Operations Class – Part 1 of 3

Virtual: https://events.vtools.ieee.org/m/322035

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322035

Becoming a Licensed Engineer – Advantages and First Steps

Virtual: https://events.vtools.ieee.org/m/322539

IEEE-USA Free Livestream Webinar Have you considered being licensed as a professional engineer? What are the advantages? What is involved? Why should electrical or computer engineers be licensed, and what about software engineers? Come hear the answers to these and other questions about the Fundamentals Engineer (FE) and Professional Engineer (PE) exams. Speaker(s): Bob Becnel, Agenda: Livestream links: - YouTube: https://bit.ly/webinar-9-14-22-yt - Facebook: https://bit.ly/webinar-9-14-22-fb - LinkedIn: https://bit.ly/webinar-9-14-22-li --------------------------------------------------------------- IEEE-USA's free webinars/events are designed to help you find your next job, maintain your career, negotiate an appropriate salary, understand ethical considerations in the workplace and learn about other career-building strategies and public policy developments that affect your profession. Virtual: https://events.vtools.ieee.org/m/322539

MOVE Virtual Operations Class – Part 2 of 3

Virtual: https://events.vtools.ieee.org/m/322096

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322096

MOVE Virtual Operations Class – Part 3 of 3

Virtual: https://events.vtools.ieee.org/m/322097

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322097

MOVE Virtual Operations Class – Part 3 of 3

Virtual: https://events.vtools.ieee.org/m/322097

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322097

MOVE Virtual Operations Class – Part 3 of 3

Virtual: https://events.vtools.ieee.org/m/322097

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322097

MOVE Virtual Operations Class – Part 3 of 3

Virtual: https://events.vtools.ieee.org/m/322097

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322097

MOVE Virtual Operations Class – Part 3 of 3

Virtual: https://events.vtools.ieee.org/m/322097

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322097

MOVE Virtual Operations Class – Part 3 of 3

Virtual: https://events.vtools.ieee.org/m/322097

MOVE is offering a 3 part, Virtual, Operations Class. This class is required for everyone interested in deploying on the MOVE truck or has a general interest in the program. It is required for new MOVE members and recommended as a refresher for those that have previously taken it. We discuss what to expect when deploying, what equipment is on the MOVE truck, and several safety procedures when working around the truck. This is a virtual class that is broken up into 3 required 2 hour sessions. Now that MOVE has two trucks, differences between the trucks will be discussed. If you took this class previously, there will be new material due to the 2nd truck differences. This is a 3 part virtual class. - Part 1: 13 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322035 - Part 2: 20 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322096 - Part 3: 27 Sept 2022 at 8:00 - 10:00 PM ET https://events.vtools.ieee.org/m/322097 There will be a test after the third session - material will be provided for the test. Please use the above links to register for all three training sessions Co-sponsored by: MOVE Agenda: - Part 1: 13 Sept 2022 from 8:00-10:00 PM ET - Part 2: 20 Sept 2022 from 8:00-10:00 PM ET - Part 3: 27 Sept 2022 from 8:00-10:00 PM ET Virtual: https://events.vtools.ieee.org/m/322097